Model 牌號 |
Machine Barrel Temperature 機筒溫度 |
Molding Temprature 機頭溫度 |
EHW90GD | 130-140℃ | 150-160℃ |
Item 試驗項目 |
Unit 單位 |
Specification 技術要求 |
|
Density 密度 |
g/cm3 | ≤1.7 | |
Tensile Strength 拉伸強度 |
MPa | ≥10 | |
Elongation at Break 斷裂伸長率 |
% | ≥150 | |
Aging Conditions 熱老化條件 |
/ | 100℃×168h | |
Tensile Strength Variation 拉伸強度變化率 |
% | ±25 | |
Elongation Variation 斷裂伸長率變化率 |
% | ±25 | |
Thermal Deformation 熱變形 |
Condition | ℃ | 100℃×6h |
Variation | % | ≤50 | |
Dielectric Strength 介電強度 |
MV/m | ≥20 | |
Brittle Temperature With Low Temperature Impact 沖擊脆化溫度 |
℃ | -30 | |
20℃Volume Resistivity 20℃體積電阻率 |
Ω.m | ≥1.0×1011 | |
Oxygen Index 氧指數 |
% | ≥46 | |
HCL Gas Evolution HCL氣體發生量 |
Mg/g | ≤1.0 | |
PH Value PH值 |
/ | ≥4.3 | |
Smoke Density煙密度 – No-flame Mode無焰模式 – Flame Mode有焰模式 |
Ds max | ≤200 ≤150 |
|
Conductivity 電導率 |
uS/mm | ≤10 | |
Toxicity Index 毒性指數 |
/ | ≤5.0 |